Posted on

DIY Custom Fabric Mats for Framed Photos

untitled-1394

Adding fabric covered mats to your collection of framed photographs or art prints is a quick and budget friendly way to add a chic element of personality and style to any space. For this project, I chose my X’s black and white patterned fabric (soon available to purchase by the yard). The photo being used was taken by a our good friend Amanda Grace Images. This one single, magic moment of my family needed to be framed in a special way. Amanda actually suggested that I frame it using my X’s fabric. It was the perfect fit for the photo and room decor. Keep reading for my step by step version of this fun and easy project.

Custom Fabric Covered Photo Mats

untitled-1311

What you will need:

1. Photo
2. Photo Frame with Pre-cut Mat
3. Piece of Fabric
4. Rotary Cutter and Matte Cutting Board
5. Fabric Scissors
6. Quilters Grip Grid Ruler (or Regular Cork Back Ruler)
7. Spray Adhesive, Rubber Cement, Fabric Glue
8. Acid Free Mounting Tape
9. Well Ventilated Work Space
10.Colored Pencil or Disappearing Ink Pen

untitled-1314

Start out by cutting your fabric, allowing at least 1.5 – 2 inches on each side to fold over mat. Then give a pass under your iron to smooth out any wrinkles or creases.

untitled-1316

In a well ventilated area apply an even coat of spray adhesive to the front of pre-cut mat. Lay adhesive side down on the back of fabric in the center leaving enough of the sides to fold over. Use your palm to press mat down into fabric.

untitled-1322

x

Brush a thick line of rubber cement on the right side of the back of your mat board. Then fold the fabric over the edge of the mat and using your fingers smooth and press into the glue. Repeat on the left side.

x2

Fold the bottom right corner into a triangle to align with the edge of mat board. Glue the flap down. Repeat on the same process on the bottom left corner.

untitled-1330

Brush a thick line of rubber cement from the bottom right corner of the mat to the bottom left corner. Fold the fabric up over the edge and use your fingers to smooth and press into the glue. Repeat on the opposite side.

untitled-1331

untitled-1334

Can use a drop of fabric glue on the corners to keep your triangles tacked down.

untitled-1336

You are ready to cut the fabric center out for your photo.

untitled-1344

Find the pre-cut center edges on the front of your fabric wrapped mat board. Now use the grid ruler (or regular ruler) to draw a diagonal line from the bottom left corner to top right corner. Then draw another line from top left to bottom right corner.

untitled-1351

untitled-1352

Should create an “X” in the center of your fabric mat. Use your rotary cutter or fabric scissors to cut from corner to corner. You should end up with four triangle pieces of fabric in the center. These pieces can now be tacked onto the back side of your mat board.

untitled-1354

Again using the rubber cement, apply an even line on back of board then fold fabric over the edge of mat and press with fingers.

untitled-1356

untitled-1355

Repeat on all four sides.

untitled-1358

Cut off excess fabric with fabric scissors.

untitled-1359

You are ready to mount your photo.

untitled-1365

Use Acid Free Mounting Tape to mount your photo onto the mat.

untitled-1367

Once tape is in place center your mat board over the photo. Press down firmly. Use additional tape if needed.

untitled-1368

Ready to frame and put new piece of art into place.

untitled-1395
untitled-1403

(From Left to Right: white gallery shelves www.ikea.com, metal frame by Reclamation Industrial Furnishings, photo by Valerie Kiser, ABCD Art Print by Valerie Kiser Design, family portraits by Amanda Grace Images, photo frames www.Target.com, memento post card of Alexander McQueen from Savage Beauty, sketch by Valerie Kiser Design, unframed photo by Rob Lettieri Photography, framed portrait by Chala Jan

untitled-1402